Sunhans 2.4GHz~2.5GHz Bi-Directional Amplifier 4W 2400MHz Signal Repeater Wireless WiFi Booster with 6dBi Omni Antenna

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: SH24Gi4000P
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: RoHS, CE, FCC
• Condition: New
• Item: 2.4GHz 4W WiFi Signal Booster
• Sku: 0305sh200767
• Operating Range: 2400~2500MHz
• Supported Standards: IEEE 802.11b/a/G/N
• Input Power: 0~20 dBm
• Transmit Gain: 17-20dB
• Output Power: 4000MW (36dBm)
• Receiver Gain: Less Than 12 dB
• Supported Voltages: 6V/2A DC,100V~240V
• Booster Weight: 133G
• Transport Package: Carbon
• Specification: 8.4 x 4.7 x 1.7cm
• Trademark: Sunhans
• Origin: China
• Production Capacity: 8000PCS/Month

Product Description

Sunhans Network Wireless Amplifying Repeater 4W 4000mW 2400~2500MHz 36dBm Low Noise WiFi Signal Booster for UAV, IP cameras IEEE 802.11b/a/g/n Supported
 

Product Description

Features:  
2.4GHz, Max. 4000mW  output power;
Aluminum-alloy case by CNC, anti-interference;
Cost effective solution for weak signal zones, reduce drop/off calls;
Full kit, easy to install; light weight, small size, protable;
Designed for house, office, UAV, IP cameras, supermarkets....

 

Detailed Photos

 

Product Parameters

Cell phone Amplifier Description: 4000mW 2.4Ghz 36dBm WiFi Signal Booster

SKU	0305SH200767
Model	SH24Gi4000P
Operating Range	2400~2500 GHz
Channel width	20Mhz & 40Mhz
Supported standards	IEEE 802.11b/a/g/n
Operating Mode	Bi-directional, half-duplex, time division duplex
Connector type	To radio SMA female (hole inside). To antenna RP-SMA female (pin inside)
Input power	0~20 dBm
Transmit gain	17-120dB
Output Power	4W (36dBm)
Receiver Gain	≤ 12 dB
Noise Figure	≤3.5 dB typical
Frequency Response	±1dB over operating range
Connector type	N-K female
Power supply	6V/2A DC, 100~240V
Operating Temperature	-20°C to + 70°C
Operating Humidity	Up to 75% relative humidity
LED light	Power status LED and activity status LED
Material	Cast Aluminum
Booster Size	9.7 x 6.4 x 1.7cm
Booster Weight	133g

Package contents:

1 x SH24Gi4000 WiFi booster
1 x RG316 cable with SMA connectors (20cm)
1 x 6dBi omni antenna
1 x power supply

Application Scenarios

All specifications of PA can be customized based on customer requirement.

Product Description:
   The 2.4GHz WLAN signal booster is designed for IEEE 802.11b/g/n/a/ac Wireless LAN Applications.The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate. 

Features:
1. Easy Installation
2. Plug and play, no software setup.
3. 3.5dB ultra-low noise.
4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.
5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied.
6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.
7. Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g and 802.11n (2.4 GHz mode only). 

Application:
   2.4GHz 3w 35dBm is Popular for UAV,Routers,IP cameras, R/C helicopters, planes and cars, Bluetooth, Walkie talkies,Robotics for beach and flood rescue;
  For house, office,Hotels,supermarkets, Hospitals,parking spaces, office....
  Solution: Hot Spot solutions,Access points,Smart home systems

1. What is the WiFi signal booster?
  The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.

2. Can I install the Sunhans booster myself?
 Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.

Company Profile

About US

After Sales Service

 Our Service:                                                                                                                                                                                

    ♦ Test process : every items will be testing before shipping, to make sure the quality.
    ♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
    ♦ One year warranty: for you without trouble of after-sales maintenance.
    ♦ Quality Guarantee: Return rate is only 0.001.
    ♦ Support small orders: help your business from small to big.
    ♦ OEM & ODM are welcome.