Powerful 10W Wireless Extender Indoor Amplifier 5.8GHz WiFi Repeater Lone Range Signal Booster for Point to Point

Product Description

Sunhans Network Wireless Amplifying Repeater 10W 5.0~5.8GHz 40dBm Low Noise Outdoot WiFi Extender Signal Booster for UAV, IP cameras IEEE 802.11a/n/ac Supported
 

Product Description

Features:  
5.8Ghz, Max. 10W  output power;
Aluminum-alloy case by CNC, anti-interference;
Strengthen radio signal to Increase the effective range and coverage area for Wi-Fi communication;
Cost effective solution for weak signal zones, reduce drop/off calls;
Make broadband wireless application in possible coverage.
Full kit, easy to install; light weight, small size, protable;
Designed for house, office, UAV, IP cameras, RC equipment....

Product Parameters

Cell phone Amplifier Description: 10W 5.8GHz 40dBm WiFi Signal Booster Outdoor

SKU	0305SH200779
Model	SHPro58Gi10W
Operating Range	5000~5875MHz
Channel width	20Mhz & 40Mhz
Supported standards	IEEE 802.11n/a/ac
Operating Mode	Bi-directional, half-duplex, time division duplex
Connector type	N-K female
Input power	0~20 dBm (Note: If the input power is greater than 20DBM, it needs to be explained in advance with the supplier, so that the manufacturer can adjust the equipment.)
Transmit gain	15-18dB
Output Power	10W (40dBm)
Receiver Gain	≤ 12 dB
Noise Figure	≤3.5 dB typical
Frequency Response	±1dB over operating range
Connector type	N-K female
Power supply	12V/2A DC, 100~240V
Operating Temperature	-40°C to + 70°C
Operating Humidity	Up to 75% relative humidity
LED light	Power status LED and activity status LED
Material	Cast Aluminum
Booster Size	13.2 x 14.5 x 3.9cm
Booster Weight	943g

Detailed Photos

Package contents:

1 x SHPro58Gi10W WiFi booster
1 x power supply
1 x user manual

All specifications of PA can be customized based on customer requirement.
 

Product Description:
   The 2.4GHz WLAN signal booster is designed for IEEE 802.11b/g/n/a/ac Wireless LAN Applications.The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate. 

Application:
   2.4GHz 3w 35dBm is Popular for UAV,Routers,IP cameras, R/C helicopters, planes and cars, Bluetooth, Walkie talkies,Robotics for beach and flood rescue;
  For house, office,Hotels,supermarkets, Hospitals,parking spaces, office....
  Solution: Hot Spot solutions,Access points,Smart home systems


 

Features:

1. Easy Installation

2. Plug and play, no software setup.

3. 3.5dB ultra-low noise

4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.

5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied

6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.

1. What is the WiFi signal booster?
  The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.

2. Can I install the Sunhans booster myself?
 Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.

About US





   Our Service:                                                                                                                                                                  
    ♦ Test process : every items will be testing before shipping, to make sure the quality.
    ♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
    ♦ One year warranty: for you without trouble of after-sales maintenance.
    ♦ Quality Guarantee: Return rate is only 0.001.
    ♦ Support small orders: help your business from small to big.
    ♦ OEM & ODM are welcome.