Customization: | Available |
---|---|
Type: | Signal Repeater |
Transmission Medium: | Cable |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Uplink | Downlink | |
Frequency Range | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz |
Bandwidth | 25MHz | |
Gain | 76±2 dB | 82±2 dB |
Band Width | 1 Sub bands for each system | |
ALC (Automatic Level Control) | ≥ 15dB | |
In-band Ripple | ≤ 8dB | |
Noise Figure | ≤ 5dB | |
Output Power | 33 dBm± 2dB | 36 dBm± 2dB |
Intermodulation Product & Spurious Emission | 9 KHz~1 GHz | ≤ -36dBm/ 100KHz |
1 GHz~12.75 GHz | ≤ -30dBm/1MHz | |
Frequency stability | ≤ 0.01ppm | |
Operating Temperature | -5 ~ 55 ºC | |
Environmental Conditions | IP40 | |
Humidity | 5%~95% | |
Impedance | 50 Ω (Nominal) | |
Isolation | >90dB | |
PCDE | ≤ -38 dBc | |
Noise Figure | < 5 dB | |
V.S.W.R | ≤ 2.0 | |
Group Delay | ≤ 1.5μs | |
Power Supply | Input AC110~240V, Output DC24V/2.5A | |
RF Connector | N-Female | |
Dimensions (W x H x D) | 20 x 15 x 3.8cm | |
Weight | 1090g |
The repeater makes the signal stronger in places with poor signal coverage such as: |
1. Underground areas: basements, parking lots, tunnels, subway, suburb; |
2. Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels, building; |
3. Places distant from the BTS like private houses. |
Easy Installation |
1. Fix up outdoor antenna reception on housetop and point to signal tower. |
2. Connect outdoor antenna to "BTS" Port on the Booster through cable. |
3. Connect indoor antenna(s) to "User" or "Mobile" Port on the Booster directly or through cable.also. |
4. Plug Power Adaptor into AC power socket and finish installation. |
How it works? |
The outside antenna (sold separately) captures a voice, signal and transfers it to the booster. |
The booster receives the signal and amplifies it. Then it transfers the signal to the indoor antenna (sold separately). |
Your mobile devices get a stronger signal, fast and consistent data speeds. |
Problem Support; |
1. If still no signal receipt after activated booster, please check whether outdoor antenna point to signal tower, or the place you install outdoor antenna have strong signal, it need be 3bar signal or more. |
2. If can not call out, please adjust the direction of outdoor antenna. |
3. If strength is not steady, please check whether outdoor and indoor antennas are too close. Please ensure the outdoor and indoor antenna have max distance, with a wall between and not in a same horizontal line. |