2W Double Band 2.4GHz & 5.8GHz Signal Repeater Wireless Amplifier WiFi Booster

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: SHRC5824G2WP
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: RoHS, CE, FCC
• Condition: New
• Item: 2W 5.8GHz 35dBm WiFi Signal Booster
• Sku: 0305sh200785
• Operating Range: 2.4~2.5 GHz, 5.0~5.875 GHz
• Input Power: 0~20 dBm
• Transmit Gain: 15-18dB
• Output Power: 2W (33dBm)
• Receiver Gain: Less Than 12 dB
• Supported Voltages: 5V~16V/2A DC
• Material: Cast Aluminum
• Booster Weight: 77g
• Transport Package: Carbon
• Specification: 9.7 x 5.2 x x1.1cm
• Trademark: Sunhans
• Origin: China
• Production Capacity: 8000PCS/Month

Product Description

Sunhans Signal Range Extender 2W 2.4G & 5.8G Dual Band 33dBm WiFi Booster Repeater Amplifier for Drones
 

Product Description

Features:  
New design for simple,simple,simple
Excitingly small! Only 77g!
5-16V wide voltage range;support different power supply;
2.4G &5.8G dual band, Auto switch frequency;
Aluminum-alloy case by CNC, anti-interference;
Full kit, easy to install; light weight, small size, protable;
Designed for Drones, UAV, RC equipment....

 

Detailed Photos

 

 

Product Parameters

Cell phone Amplifier Description: 2000mW 2.4Ghz & 5.8GHz 33dBm WiFi Signal Booster

SKU	0305SH200785
Model	SHRC5824G2WP
Operating Range	2.4~2.5 GHz, 5.0~5.875 GHz
Operating Mode	Bi-directional, half-duplex, time division duplex senses RF, carrier from transmitter and automatically switch receiving to transmitting mode
Input power	0~20 dBm
Transmit gain	15-18dB
Output Power	2W (33dBm)
Receiver Gain	≤ 12 dB
Noise Figure	≤3.5 dB typical
Frequency Response	±1dB over operating range
Connector type	SMA Receptacle 50ohm,To radio SMA female(hole inside),To antenna RP-SMA female(pin inside)
Power supply	5V~16V/2A DC
Operating Temperature	-20°C to + 70°C
Operating Humidity	Up to 75% relative humidity
Material	Cast Aluminum
Booster Size	9.7 x 5.2 x x1.1cm
Booster Weight	77g

Package contents:

1 x SH-RC5824G2W eSunRc WiFi booster
1 x DC 2.5" to USB adapter
1 x DC 2.5" to JST adapter
1 x Mounting Velcro
1 x User Manual

 

Our Advantages

All specifications of PA can be customized based on customer requirement.

The 2.4GHz&5.8GHz WLAN signal booster is designed for IEEE 802.11b/g/n Wireless LAN Applications.

The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification.

The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate. 

  SHRC58G2WP 5.8ghz 2w 33dBm is specially designed for  UAV, drones, compatible perfectly with DJI, Yuneec, 3DR, XIRO, Parrot, JTT and Blade, also auitable for active speaker, router and so on. 

 

Features:
1.Easy Installation.
2.Plug and play, no software setup.
3.3.5dB ultra-low noise. High Gain, High Value, High Performance.
4.Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.
5.Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied.
6.Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.
 

1. What is the WiFi signal booster?
  The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.

2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.

3. Can I install the Sunhans booster myself?
 Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.

Company Profile

About US

After Sales Service

Our Service:                                                                                                                                                                               

    ♦ Test process : every items will be testing before shipping, to make sure the quality.
    ♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
    ♦ One year warranty: for you without trouble of after-sales maintenance.
    ♦ Quality Guarantee: Return rate is only 0.001.
    ♦ Support small orders: help your business from small to big.
    ♦ OEM & ODM are welcome.