2.4G Repeater High Output 20W Indoor Wireless Amplifier Industry WiFi Coverage Signal Booster

• Type: Signal Repeater
• Transmission Medium: Cable
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: RoHS, CE, FCC
• Condition: New
• Model NO.: SH24Gi20W
• Item: 2.4GHz 20W 43dBm WiFi Signal Booster Outdoor
• Sku: 0305sh100282
• Compact Design: Outdoor Use
• Operating Range: 2400~2500MHz
• Supported Standards: IEEE 802.11b/a/G/N
• Input Power: 0~26 dBm
• Transmit Gain: 25dB
• Output Power: 20W (43dBm)
• Receiver Gain: Less Than 22 dB
• Supported Voltages: 24V/2A DC, 100~240V
• Booster Weight: 620g
• Transport Package: Carbon
• Specification: 15.2 x 13.1 x 2.6cm
• Trademark: Sunhans
• Origin: China
• Production Capacity: 8000PCS/Month

Product Description

Sunhans 20W 2.4GHz 2400~2500MHz Bi-Directional Wireless Amplifier WiFi Signal Booster Repeater Outdoor for Extend Signal Range
 

Product Description

Features:  
2.4GHz, Max. 20W big output power;
Aluminum-alloy case by CNC, anti-interference;
Cost effective solution for weak signal zones, reduce drop/off calls;
Full kit, easy to install; small size, protable;
Designed for supermarkets, parking spaces, office, ...

 

Detailed Photos

 

Product Parameters

Cell phone Amplifier Description: 20W 2.4Ghz 43dBm WiFi Signal Booster Indoor

SKU	0305SH100282
Model	SH24Go20W
Operating Range	2400~2500MHz
Channel width	20Mhz & 40Mhz
Supported standards	IEEE 802.11b/g/n
Operating Mode	Bi-directional, half-duplex, time division duplex
Connector type	To radio SMA female (hole inside). To antenna RP-SMA female (pin inside)
Input power	0~26dBm (Note: If the input power is greater than 20DBM, it needs to be explained in advance with the supplier, so that the manufacturer can adjust the equipment.)
Transmit gain	25dB
Output Power	20W (43dBm)
Receiver Gain	≤ 22 dB
Noise Figure	≤3.5 dB typical
Frequency Response	±1dB over operating range
Connector type	N-K female
Power supply	24V/2A DC, 100~240V
Operating Temperature	-25°C to + 55°C
Operating Humidity	Up to 75% relative humidity
Material	Cast Aluminum
LED light	Power status / activity status LED
Booster Size	15.2 x 13.1 x 2.6cm
Booster Weight	870g

Package contents:
1 x SH24Gi20W WiFi booster
1 x power supply
1 x user manual

Installation Instructions

All specifications of PA can be customized based on customer requirement.
Application
The repeater makes the signal stronger in places with poor signal coverage such as:
1. Underground areas: basements, parking lots, tunnels, subway, suburb;
2. Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels;
3. Places distant from the BTS like private houses.

Features:

1.Easy Installation.
2.Plug and play, no software setup.
3.3.5dB ultra-low noise. High Gain, High Value, High Performance.
4.Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.
5.Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied.
6.Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.
Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g and 802.11n (2.4 GHz mode only). 
 

1. What is the WiFi signal booster?
  The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.

2. Can I install the Sunhans booster myself?
 Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.

Product Description:
1.20W 2.4GHz 43dBm is the fast and easy way to extend your signal  range in any environment. This wireless signal repeater is ideal for use with 2.4GHz frequency  hopping or direct sequence spread spectrum  radio modems and 1500 MBps IEEE802.11b/a/g/n devices. 
2.Increase range by providing transmit gain as well as lownoise receive gain. This receive gain increase the receive sensitivity of wireless LAN.
3. Access point.Full output power of 20W is achieved with only 36 mW  input into the WiFi signal booster.

Company Profile

About us

After Sales Service

 

  Our Service:                                                                                                                                                                                       
    ♦ Test process : every items will be testing before shipping, to make sure the quality.
    ♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
    ♦ One year warranty: for you without trouble of after-sales maintenance.
    ♦ Quality Guarantee: Return rate is only 0.001.
    ♦ Support small orders: help your business from small to big.
    ♦ OEM & ODM are welcome.