Sunhans Tx Wireless Extender 4W 5.8g 36dBm WiFi Signal Booster for Drone Image Video Transmission

• Type: Signal Repeater
• Transmission Medium: Cable
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: RoHS, CE, FCC
• Condition: New
• Model NO.: SHPro58GTX4W
• Item: 4W 5.8GHz 36dBm WiFi Signal Booster
• Sku: 0305sh200789
• Operating Range: 5.0~5.875 GHz
• Input Power: 0~20 dBm
• Transmit Gain: 17-20dB
• Output Power: 4W (36dBm)
• Supported Voltages: 5V~16V/2A DC
• Material: Cast Aluminum
• Booster Size: 9.2 X 4.1 X 1cm
• Booster Weight: 59g
• Transport Package: Carbon
• Specification: 12 x 11 x 6.5cm
• Trademark: Sunhans
• Origin: China
• Production Capacity: 8000PCS/Month

Product Description

SUNHANS eSunRC WiFi Signal Booster 4000mW 5.8Ghz 36dBm WiFi Signal Repeater Amplifier Extender for Drones Image Video Transmission

Features:  
    Excitingly small! Only 59g!
    5-16V wide voltage range;
    5.8GHz, Max. 4000mW output power;
    Aluminum-alloy case by CNC, anti-interference;
    Full kit, easy to install; light weight, small size, protable;
    Designed for Drones, UAV, RC equipment....
♦ TX only, Only transmit the signal, turn off the receive the signal, the drone remote control terminal can get clearer video and image.



Cell phone Amplifier Description: 4000mW 5.8Ghz 36dBm WiFi Signal Booster
 

SKU	0305SH200789
Model	SHPro58GTX4W
Operating Range	5.0~5.875 GHz
Channel width	20Mhz&40Mhz&80Mhz
Operating Mode	Bi-directional, half-duplex, time division duplex
Input power	0~20 dBm  (output power of the device = input power of the amplifier), Sunhans SH58Gi4000 booster input power 0~20dBm(18~19dBm will better), if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly let us know, we will give the suggestion to solove this question according to your actual situation.
Transmit gain	17-20dB
Output Power	4W (35dBm)
Supported standards	IEEE 802.11a/n/ac
Noise Figure	≤3.5 dB typical
Frequency Response	±1dB over operating range
Connector type	To radio SMA female(hole inside), To antenna RP-SMA female(pin inside)
Power supply	5V~16V/2A DC
LED light	Power status LED and activity status LED
Material	Cast Aluminum
Booster Size	9.2 x 4.1 x 1cm
Booster Weight	59g
Package Size	12 x 11 x 6.5cm

    Package contents:

• SHPro58GTX4W eSunRc WiFi booster
• RG141 20cm cable SMA male to RP-SMA male
• DC 2.5" to 12V 5.5" adapter
• DC 2.5" to USB adapter
• DC 2.5" to JST adapter
• Mounting Velcro
• User Manual

Product Description:

 1. [Simply plug and play]
Extend the range of your wireless network with the Indoor Wifi Booster Amplifier.
Plug and play connections,no software, no configuration and virtually no setup of software.
 

2. [Compatible with any 5.8G wireless device],used for transmit need (TX Only).
Our product can support 5.8G Hz WLAN 802.11a,802.11n,802.11ac,5.8G Hz wireless AP, 5.8G Hz wireless bridge,5.8GHz wireless router, 5.8GHz wireless network card, 5.8GHz wireless monitoring(NVR,DVR), 5.8GHz wireless microphone, 5.8GHz bluetooth,RC drones,FPV device etc

3.[Maximum Output power].
The max output power can be up to 4000mW.
This amplfier will boost the transmit (TX Only) power of your wireless device a whopping 36dBm.

 

Features:

1. Easy Installation

2. Plug and play, no software setup.

3. 3.5dB ultra-low noise

4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.

5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied

6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.

1. What is the WiFi signal booster?
  The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.

2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.

3. Can I install the Sunhans booster myself?
 Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.

About US





   Our Service:                                                                                                                                                                  
    ♦ Test process : every items will be testing before shipping, to make sure the quality.
    ♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
    ♦ One year warranty: for you without trouble of after-sales maintenance.
    ♦ Quality Guarantee: Return rate is only 0.001.
    ♦ Support small orders: help your business from small to big.
    ♦ OEM & ODM are welcome.