Sunhans Single Band 5.8GHz 1000MW Network Repeater 30dBm WiFi Indoor Signal Booster for Wireless Amplifier Ap Point to Multipoint

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: SH58Gi1000D2P
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: RoHS, CE, FCC
• Condition: New
• Item: 5.8GHz 1W WiFi Signal Booster
• Sku: 0305sh100312
• Operating Range: 5000~5875MHz
• Supported Standards: IEEE 802.11A/N, 2tx2r
• Input Power: 0~20 dBm
• Transmit Gain: 12-14dB
• Output Power: 1000MW (30dBm)
• Receiver Gain: Less Than 12 dB
• Supported Voltages: 5V~16V/2A DC,100V~240V
• Booster Weight: 178g
• Transport Package: Carbon
• Specification: 8.4 x 4.7 x 1.7cm
• Trademark: Sunhans
• Origin: China
• Production Capacity: 8000PCS/Month

Product Description

Sunhans Network Wireless Amplifying Repeater 1W 1000mW 5000~5875MHz 30dBm Low Noise WiFi Signal Booster for UAV, IP cameras IEEE 802.11a/n Supported
 

Product Description

Features:  
5.8GHz, Max. 1000mW MIMO output power;
Aluminum-alloy case by CNC, anti-interference;
Cost effective solution for weak signal zones, reduce drop/off calls;
Full kit, easy to install; light weight, small size, protable;
Designed for house, office, UAV, IP cameras, RC equipment....

 

Detailed Photos

 

 

Product Parameters

Cell phone Amplifier Description: 1000mW 5.8Ghz 30dBm 2T2R 300Mbps MIMO WiFi Signal Booster

SKU	0305SH100312
Model	SH58Gi1000P
Operating Range	5000~5875 GHz
Channel width	20Mhz & 40Mhz & 80MHz
Supported standards	IEEE 802.11a/n, 2T*2R
Operating Mode	Bi-directional, half-duplex, time division duplex, MIMO
Connector type	To radio SMA female (hole inside). To antenna RP-SMA female (pin inside)
Input power	0~20 dBm
Transmit gain	12-14dB
Output Power	1W (30dBm)
Receiver Gain	≤ 12 dB
Noise Figure	≤3.5 dB typical
Frequency Response	±1dB over operating range
Connector type	N-K female
Power supply	12V/2A DC, 100~240V
Operating Temperature	-20°C to + 70°C
Operating Humidity	Up to 75% relative humidity
LED light	Power status LED and activity status LED
Material	Cast Aluminum
Booster Size	8.5 x 7 x 2cm
Booster Weight	178g

Package contents:

1 x SH58Gi1000-D2 WiFi booster
2 x RG316 cable with SMA connectors (20cm)
2 x 6dBi omni antenna
1 x power supply
1 x user manual

Our Advantages

All specifications of PA can be customized based on customer requirement.

Features:

1.Easy Installation.
2.Plug and play, no software setup.
3.3.5dB ultra-low noise. High Gain, High Value, High Performance.
4.Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.
5.Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied.
6.Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.
Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g and 802.11n (2.4 GHz mode only).

The 2.4GHz WLAN signal booster is designed for IEEE 802.11b/g/n/a/ac Wireless LAN Applications.

The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification.

The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate. 

The repeater makes the signal stronger in places with poor signal coverage such as:
1. Underground areas: basements, parking lots, tunnels, subway, suburb;
2. Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels;
3. Places distant from the BTS like private houses.


1. What is the WiFi signal booster?
  The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.

2. Can I install the Sunhans booster myself?
 Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.

Company Profile

About US

After Sales Service

 Our Service:                                                                                                                                                                                    

    ♦ Test process : every items will be testing before shipping, to make sure the quality.
    ♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
    ♦ One year warranty: for you without trouble of after-sales maintenance.
    ♦ Quality Guarantee: Return rate is only 0.001.
    ♦ Support small orders: help your business from small to big.
    ♦ OEM & ODM are welcome.