| Customization: | Available |
|---|---|
| Type: | Signal Repeater |
| Transmission Medium: | Cable |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Cell phone Amplifier Description: 4000mW 5.8Ghz 36dBm WiFi Signal Booster
| SKU | 0305SH200789 |
| Model | SHPro58GTX4W |
| Operating Range | 5.0~5.875 GHz |
| Channel width | 20Mhz&40Mhz&80Mhz |
| Operating Mode |
Bi-directional, half-duplex, time division duplex |
| Input power | 0~20 dBm
(output power of the device = input power of the amplifier), Sunhans SH58Gi4000 booster input power 0~20dBm(18~19dBm will better), if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly let us know, we will give the suggestion to solove this question according to your actual situation. |
| Transmit gain | 17-20dB |
| Output Power | 4W (36dBm) |
| Supported standards | IEEE 802.11a/n/ac |
| Noise Figure | ≤3.5 dB typical |
| Frequency Response | ±1dB over operating range |
| Connector type | To radio SMA female(hole inside), To antenna RP-SMA female(pin inside) |
| Power supply | 5V~16V/2A DC |
| LED light | Power status LED and activity status LED |
| Material | Cast Aluminum |
| Booster Size | 9.2 x 4.1 x 1cm |
| Booster Weight | 59g |
| Package Size | 12 x 11 x 6.5cm |
1. [Simply plug and play]
Extend the range of your wireless network with the Indoor Wifi Booster Amplifier.
Plug and play connections,no software, no configuration and virtually no setup of software.
2. [Compatible with any 5.8G wireless device],used for transmit need (TX Only).
Our product can support 5.8G Hz WLAN 802.11a,802.11n,802.11ac,5.8G Hz wireless AP, 5.8G Hz wireless bridge,5.8GHz wireless router, 5.8GHz wireless network card, 5.8GHz wireless monitoring(NVR,DVR), 5.8GHz wireless microphone, 5.8GHz bluetooth,RC drones,FPV device etc
3.[Maximum Output power].
The max output power can be up to 4000mW.
This amplifier will boost the transmit (TX Only) power of your wireless device a whopping 36dBm.
1. What is the WiFi signal booster?
The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.
2. About LED lights.
1). A flashing green light indicates that the wifi signal booster is powered on.
2).Normal operation is a red light flashing green, indicating that the signal booster receives the signal from the device and sends a wifi signal.
3. Can I install the Sunhans booster myself?
Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.
){kind=link}