Sunhans Internet Signal Amplifier Repeater 2.4G 1W Indoor WiFi Booster with Dual Antenna

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Cable
• Model NO.: SH24Gi1000D2P
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: RoHS, CE, FCC
• Condition: New
• Item: 2.4GHz 1000MW 2T2R MIMO WiFi Signal Booster
• Sku: 0305sh100215
• Operating Range: 2400~2500MHz
• Input Power: 0~20 dBm
• Transmit Gain: 12-14dB
• Output Power: 1000MW (30dBm)
• Receiver Gain: Less Than 12 dB
• Supported Voltages: 12V/2A DC, 100~240V
• Material: Cast Aluminum
• Booster Weight: 178g
• Transport Package: Carbon
• Specification: 8.5 x 7 x 2cm
• Trademark: Sunhans
• Origin: China
• Production Capacity: 8000PCS/Month

Product Description

Sunhans 1W 1000mw Router Range Extender 30dBm Support IEEE802.11b/g/n Signal Amplifier Booster


Features:  
2.4GHz, Max. 1000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Cost effective solution for weak signal zones, reduce drop/off calls;
Full kit, easy to install; light weight, small size, protable;
Designed for house, office, UAV, IP cameras, RC equipment....



Cell phone Amplifier Description: 4GHz 1000mW 2T2R 300Mbps MIMO WiFi Signal Booster

 

SKU	0305SH100215
Model	SH24Gi1000D2P
Operating Range	2400~2500MHz
Channel width	20Mhz & 40Mhz
Supported standards	IEEE 802.11b/g/n (802.11n Draft 2.0), 2Tx2R
Operating Mode	Bi-directional, half-duplex, time division duplex, MIMO
Input power	0~20 dBm
Transmit gain	12-14dB
Receiver gain	9-11dB
Output Power	1000mW (30dBm)
Receiver Gain	≤ 12 dB
Noise Figure	≤3.5 dB typical
Frequency Response	±1dB over operating range
Connector type	N-K female
Power supply	12V/2A DC, 100~240V
Operating Temperature	-20°C to + 70°C
Operating Humidity	Up to 90% relative humidity
Material	Cast Aluminum
LED light	Power status LED and activity status LED
Booster Size	8.5 x 7 x 2cm
Booster Weight	178g

Package contents:

2 x SHPro5824G4W WiFi booster
2 x power supply
2 x user manual
2 x RG141 SMA male to RP-SMA male
2 x 5.8GHZ RC antenna
2 x N male to SMA female with hole

All specifications of PA can be customized based on customer requirement.




Product Description:
   The 2.4GHz&5.8GHz WLAN signal booster is designed for IEEE 802.11b/g/n/a/ac Wireless LAN Applications.The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate. 

Application:
  SHPro5824G4WP1 2.4GHz&5.8GHz 4w 36dBm is Popular for UAV,Routers,IP cameras, R/C helicopters, planes and cars, Bluetooth, Walkie talkies,Robotics for beach and flood rescue;
  For house, office,Hotels,supermarkets, Hospitals,parking spaces, office....
  Solution: Hot Spot solutions,Access points,Smart home systems




 

Features:

1. Easy Installation

2. Plug and play, no software setup.

3. 3.5dB ultra-low noise

4. Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.

5. Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied

6. Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.

1. What is the WiFi signal booster?
  The working mode of the WiFi signal booster needs to be connected to the signal source (customer device which cause wifi signal ) through one end of the cable, and the other end is connected to the antenna, and the WiFi signal range is expanded through the antenna.

2. Can I install the Sunhans booster myself?
 Of course, our products are easy to install and plug and play, and the product package contains instructions for each product.

About US





   Our Service:                                                                                                                                                                  
    ♦ Test process : every items will be testing before shipping, to make sure the quality.
    ♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
    ♦ One year warranty: for you without trouble of after-sales maintenance.
    ♦ Quality Guarantee: Return rate is only 0.001.
    ♦ Support small orders: help your business from small to big.
    ♦ OEM & ODM are welcome.